Features and Benefits
C-90-P All Metal Polish cleans, polishes and protects harder metals like chrome, stainless steel, magnesium and nickel surfaces. All Metal Polish contains ultra fine abrasives combined with 2 high grade silicones and wax in a solvent formula. Works great on billet and cast aluminum, brass, copper, gold, silver, bronze and other non-clear coated metals. This solvent based liquid formulation goes on easily and wipes off effortlessly. It quickly removes corrosion, oxidation, stains, rust, tarnish, water spots, tar, grease, bugs and dirt, while restoring the metal's original brilliance. Carnauba wax and natural oils seal in deep shine and offers long term protection. It contains no acid or ammonia. Utilizes a fine abrasive system for better polishing qualities. The two-stage solvent formula contains no thickeners or suspension agents, so shaking polishing agents back into suspension is required.
Recommended Use
Auto and truck trim, stainless tankers, billet aluminum accessories, Harley trim, running boards, diamond plate, ALCOA, Centerline and other custom wheels, marine hardware, engine accessories, metal cookware, jewelry, fire engines and more.
Always consult wheel manufacturer for care of delicate, aftermarket wheels before using this product as staining may occur.
Product Details: VOC Compliant NPE Free Phosphate Free pH: 8.5 Color: Light Blue Fragrance: Odorless
Application: Shake well before using. Read label before use. See SDS for more information. Hand Use: Apply product to a clean microfiber wax applicator and spread evenly over surface, rubbing well in a back and forth motion, with the grain of the metal, until a black residue appears. On chrome, clear coated and non metal surfaces, no residue will appear. Let dry to a haze (about 1 min.) and wipe off with a clean, microfiber towel. Polish by hand to a high gloss, turning towel while wiping down. Reapply as needed. D/A Polisher: Use a PRO® YU-7-C D/A Yellow Light Polish Pad. Apply product to pad. Set dual action polisher to 4-5. Turn on polisher and buff with adequate pressure, spreading product evenly over surface. As product disappears, reduce pressure and polish to a glossy finish. Clean pad often to remove contaminants. High Speed Buffer: Use a PRO® VC-80-C Wool Buffing Pad or VF-85-C Yellow Foam Compound Pad. Apply product to pad and spread evenly over small area of metal surface before buffing. Buff product with adequate pressure at 1200- 2000 rpm. As product dries, reduce pressure and polish to a high gloss. Clean pad often to remove contaminants.
Helpful Tips: Keep from freezing (32 ºF/0 ºC). NIOSH approved dust mask and safety glasses are recommended while machine buffing this product. Do not apply in direct sunlight or onto a hot surface. Not for use on automotive paint finishes.