Pro - Double Cut Correcting Compound P-16-Q

Double Cut^™ is an aggressive low swirl, correcting compound designed to remove heavy surface imperfections. Fast removal of 1000-1200 grit sand scratches, severe swirls, holograms and heavy oxidation. May be applied by D/A or a variable speed polisher. Works well with wool or foam cutting pads. Leaves a clean, glossy surface ready for polishing. For machine use. BODY SHOP SAFE. CONTAINS NO WAX OR SILICONE. VOC compliant. 

Product Details: VOC Compliant Body Shop Safe NPE Free Phosphate Free pH: 9.3 Color: White Fragrance: Floral

Features & Benefits: Removes Heavy Surface Imperfections, Holograms, & 1000-1200 Grit Wet Sand Scratches Designed for DA Compound Correction Uses High Purity Aluminum Oxide Abrasive System Low Dust, Silica-Free Formula Great for Marine Gel Coat & Fiberglass Surfaces Body Shop Safe – Contains No Wax or Silicone

Application: Shake well before using. Read label before use. See SDS for more information. D/A Polisher: Use a PRO® BU-6 Blue All in One Polish Pad. For more aggressive action, use a PRO® MU-6 Maroon Compound Pad. Apply product to pad. Set dual action polisher to 4-5. Turn on polisher and buff with adequate pressure, spreading product evenly over surface. As product disappears, reduce pressure and polish to a glossy finish. Clean pad often to remove contaminants. High Speed Buffer: Use a PRO® VC-80-C Wool Pad or VF-85-C Yellow Foam Compound Pad. Apply product to pad and spread evenly over small area of paint surface before buffing. Buff with adequate pressure at 1200- 1800 rpm. As product disappears, reduce pressure and polish to a glossy finish. Clean pad often to remove contaminants. Follow with a P-21 Swirl Eliminator™ and a PRO® RV-85-C Charcoal Foam Polish Pad.

Helpful Tips: Keep from freezing (32 ºF/0 ºC). Safety glasses and NIOSH approved dust mask are recommended while machine buffing this product. Do not apply in direct sunlight or onto a hot surface. Polish one section at a time.