Pro - Ultimate Cutter Compound & Scratch Remover -P-27
Couldn't load pickup availability
This versatile machine compound is formulated for use on aftermarket high solid clearcoat finishes, standard OEM clears and conventional paints. Its unique micro-abrasive system allows aggressive cutting for hard, high solid clearcoats and commercial paints, yet is gentle enough for cutting and polishing softer coatings like OEM clearcoats, enamels and lacquers. Removes 1000-1200 grit wet sand scratches, oxidation, orange peel and other minor defects. Buffs quickly, leaving a clean, smooth surface ready for polishing. Water soluble formula cleans up easily out of cracks and crevices. For machine use only.
Product Details: VOC Compliant Body Shop Safe NPE Free Phosphate Free pH: 9.1 Color: White Fragrance: Floral
Features & Benefits: Aggressive, Dual Micro Particle Synthetic Abrasive System Removes 1000-1200 Grit Wet Sand Scratches on Standard & Cured High Solids Clears & Conventional Paints Leaves a Smooth Surface Ready for Polishing Body Shop Safe - Contains No Wax or Silicone
Application: Shake well before using. Read label before use. See SDS for more information. D/A Polisher: Use a PRO® BU-6 Blue All In One Polish For more aggressive action, use MU-6 Maroon Compound Pad. Pad. Apply product to pad. Set D/A polisher speed to 4-6. Turn on polisher and buff with adequate pressure, spreading product evenly over surface. As product disappears, reduce pressure and polish to a glossy finish. Clean pad often to remove contaminants. Follow with a PRO® YU-6 Yellow Polish/Finish Pad and P-21 Swirl Eliminator™. High Speed Buffer: Use a PRO® VC-80-C Wool Pad or VF-85-C Yellow Foam Compound Pad. Apply product to pad and spread evenly over small area of paint surface before buffing. Buff with adequate pressure at 1200- 1800 rpm. As product disappears, reduce pressure and polish to a glossy finish. Clean pad often to remove contaminants. Follow with a PRO® RV-85-C Charcoal Foam Polish Pad and P-21 Swirl Eliminator™.
Helpful Tips: Keep from freezing (32 ºF/0 ºC). Safety glasses and NIOSH approved dust mask are recommended while machine buffing this product. Do not apply in direct sunlight or onto a hot surface. Polish one section at a time.