Pro - Xtract Power - C-83

In stock
SKU: c-83
Regular price $22.97

5 and 55 Gallon variants cannot be shipped, available for local pick-up or delivery only.

This powerful stain cleaning concentrate is designed for use in soil extractor machines and pre-spotting on oil, protein and soil based stains on carpet, fabric and upholstery. Its unique combination of surfactants, solvents and wetting agents quickly break down and release stains so they can be easily extracted away. The low foaming formula will not clog jets or pumps and does not require a defoamer in recovery tank. Xtract Power is highly concentrated and can be diluted up to 40:1 for economy.

Product Details: Non-Flammable Biodegradable VOC Compliant Water Base Body Shop Safe NPE Free Phosphate Free Concentrated pH: 12.3 Color: Amber Fragrance: Fresh Air

Features & Benefits: Extractor Solution & Pre-Spotter Powerful 40:1 Concentrate Removes Oil, Protein & Soil Based Stains Low Foaming Solution Does Not Require Defoamer in Recovery Tank

Application: Shake well before using. Read label before use. See SDS for more information. Dilute as indicated. May be diluted up to 40:1 with water. Dry brush and thoroughly vacuum area to be cleaned. Pre-Spotting: In a spray bottle, mix a solution of 1 part Xtract Power™ to 3 parts water. Pre-spot stained and heavily soiled areas with solution and allow to dwell 3 minutes. Use extractor to remove. Can be used with hot or cold water extractors. Extractor Solution: Pour 4 ounces of Xtract Power™ per gallon of water (40:1). Heavy Duty Solution: 6 ounces of Xtract Power™ per gallon of water (20:1). Hot water works best, so allow heater to warm up solution before use. With the pump and vacuum on, depress the trigger. Xtract Power™ solution flows through the head and onto surface, penetrating deep into stained area. Pull wand slowly over stained area where contaminants and cleaning solution are systematically removed, vacuumed back up into recovery tank. Repeat with vacuum only to promote faster drying

Helpful Tips: Keep from freezing (32 ºF/0 ºC). Do not apply to hot surface or let dry on surface